Changing Pivot Orientation

Changing Pivot Orientation

Changing Pivot Orientation

Selected parts may have different local pivot orientations. In that case, you may not be able to transform them in the same direction together as you want. However, you can change pivot orientation in several ways.

To Change Pivot Orientation

1.       Select a part or parts of which you want to change pivot orientation.

2.       Select one of the following.

·         Translate

·         Rotate

·         Linear Explode

·         Spherical Explode

·         Cylindrical Explode

3.       When you select multiple parts, select Multiple Pivots as needed.

4.       Click Align Pivot from the Align Pivots panel.

5.       Do one of the following:

·         Select either World Axis or Local Axis .

·         When you select Given Pivot , mouse over another part which has the desired pivot orientation and click.

·         When you select Line/Axis , mouse over an edge which has the desired pivot orientation and click.

Graphical user interface Description automatically generated with medium confidence

The pivot orientation of the selected parts will change to the one that you specify.

Example

Diagram, schematic Description automatically generated

Diagram, schematic Description automatically generated

The selected parts have the different pivot orientation.

When Given Pivot is selected, mouse over the part which has the desired pivot orientation.

Diagram, schematic Description automatically generated

The pivot orientation of the selected parts has changed to the one that you specified.

    • Related Articles

    • Changing Pivot Position

      Changing Pivot Position In general, the pivot position is the center of part’s bounding box. You may not be able to transform them as you want under such conditions. However, you can change pivot position in several ways. To Change Pivot Position 1. ...

    • Changing the Page Size and Orientation

      Changing the Page Size and Orientation You can change the page size and orientation any time you need after you opened an EVDOC. You can set the page size and orientation on each page. To Check the Current Page Size Select a page. Do one of the ...

    • Display Pivot on Each Part

      Display Pivot on Each Part Sometimes each part may have its own pivot location and/or orientation. When you select more than one part, the pivot for the selection will be displayed by default. But you can display pivot on each part for checking or ...

    • Changing Page Sizes and Orientation

    • Changing the Camera Projection

      Changing the Camera Projection Orthographic and Perspective are supported for the camera projections. Orthographic Perspective   To Change the Camera Projection Select either Orthographic or Perspective from the Camera panel in the View tab of the ...